Please use this identifier to cite or link to this item: https://ir.iimcal.ac.in:8443/jspui/handle/123456789/1747
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRoy, Pranab
dc.contributor.authorRahaman, Hafizur
dc.contributor.authorGupta, Partha Sarathi
dc.contributor.authorDasgupta, Partha Sarathi
dc.date.accessioned2021-08-26T06:23:49Z-
dc.date.available2021-08-26T06:23:49Z-
dc.date.issued2013
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84891927484&doi=10.1109%2fICACCI.2013.6637295&partnerID=40&md5=7a1f92c81e99e9a16265587c59fdc5e6
dc.identifier.urihttps://ir.iimcal.ac.in:8443/jspui/handle/123456789/1747-
dc.descriptionRoy, Pranab, School of VLSI Technology, Bengal Engineering and Science University, Shibpur, India; Rahaman, Hafizur, School of VLSI Technology, Bengal Engineering and Science University, Shibpur, India; Gupta, Partha Sarathi, School of VLSI Technology, Bengal Engineering and Science University, Shibpur, India; Dasgupta, Partha Sarathi, Indian Institute of Management, Calcutta, India
dc.descriptionISSN/ISBN - 978-146736215-3
dc.descriptionpp.897-902
dc.descriptionDOI - 10.1109/ICACCI.2013.6637295
dc.description.abstractDigital microfluidic biochip (DFMB) systems have been developed as a promising platform for Lab-on-chip systems that manipulate individual droplet of chemicals on a 2D planar array of electrodes. Because of the safety critical nature of the applications these devices are intended for high reliability and thereby dependability becomes a major issue for the design of DMFBs. Therefore, such devices are required to be tested frequently both off-line (e.g., post-manufacturing) and prior to each assay execution. Under both scenarios, testing is accomplished by routing one or more test droplets across the chip and recording their arrival at the scheduled destination. In this paper, we have proposed a new design of a droplet motion detector based on capacitive sensing, which can be manufactured with the cell electrodes for detection of the presence (arrival) of a droplet at a predetermined location. Using this sensor, we have further proposed a customized testing technique for a specified layout with an objective of 1) optimizing the total number of test droplets for testing a particular bioassay, 2) optimizing the number of dispensers, 3) minimizing the overall test completion time, 4) detection of a specific segment at fault within the given layout, and 5) optimizing the number of locations where the detectors are to be activated. The test simulation has been carried out on two testbenches of Benchmark suite III and the results are found to be encouraging compared to the existing methods. © 2013 IEEE.
dc.publisherSCOPUS
dc.publisherProceedings of the 2013 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2013
dc.subjectCustomized testing
dc.subjectDigital micro fluidics
dc.subjectDroplet Motion Detector
dc.subjectLayout
dc.subjectRouting
dc.subjectTest completion time
dc.titleA new customized testing technique using a novel design of droplet motion detector for digital microfluidic Biochip systems
dc.typeConference Paper
Appears in Collections:Management Information Systems

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.